Basswood & Fauxwood Blind
Installaon Instrucons
Please follow these Installaon Instrucons
You will need a pencil, tape measure, drill, screwdriver, pliers, and appropriate fasteners.
Step 1: Choose the Correct Fastener
Step 2: Prepare Brackets
Step 3: Mark the Bracket Lo-
1 ½” #8 Hex Head
Wood Screws (Included)
Alternave fasteners should be used for aluminum or
concrete installaons
(Not Included with Blinds)
End Box
Installaon Brackets
Center Support
Bracket
(For Outside Mount Installaons)
Posion the box brackets at each end of the headrail. When using a
single center support bracket, center it between the box brackets. For
more than one center support bracket, space the support brackets
evenly, not more than 30” apart. Make sure the brackets will not
interfere with the cord mechanism or any other internal parts. Mark
the bracket for mounng hole locaons, making sure they are square
and equally spaced. For outside mount installaons, use a level to
check for levelness.
(For Inside Mount Installaons)
Posion the box brackets at each end of the headrail. Depending on
the installaon locaon, box brackets can be aached using the top,
back, or side holes. When using a single center support bracket, center
it between the box brackets. For more than one center support brack-
et, space the support brackets evenly, not more than 30” apart. Make
sure the brackets will not interfere with the cord mechanism or any
other parts. Mark the locaon of the desired bracket mounng holes,
making sure that they are square and equally spaced.
Prepare box brackets for installaon:
Open the front of the bracket by
pressing on the boom of the
bracket to release the locking tab
while liing the front gate.
Use the following # of Center Support Installaon Brackets based on the Blind Width:
Up to 49” 49 ⅛” - 72 ⅞” 73” and Greater
0 1 2
Valance Clips Needed
Up to 47.99” 48” - 71.99” 72” - 95.99” 96” - 119.99” 120” +
2 3 4 5 6
For your convenience , extra valance clips are included.
Comments to this Manuals